Disabling TV audio squelch circuit

21.05.2017 14:33

I just don't have any luck with Maker Faires it seems. I had everything packed and prepared for the event last week and then spent the weekend in bed with a fever. Sincere appologies to anyone who wanted to see the Galaksija. I'm sure there were more than enough other interesting exhibitions to make the visit worth your time.

Galaksija screenshot

In the weeks leading to the Maker Faire I came across an old problem with the small analog TV (United UTV 6007) that I use with vintage computers. Ever since I first played with Galaksija's audio capabilities I noticed that sound gets very distorted when played through the TV speaker. I never really looked into it. I just assumed that perhaps voltage levels were wrong for line input or the high-frequency components of 1 bit music were interfering with something. Since I had Galaksija already setup on my bench, I decided to investigate this time. It turned out that a clean sine wave from a signal generator also sounded very choppy and distorted. On the other hand, audio from a DVD player sounded perfectly fine. This made me curious and I took the TV apart.

United UTV 6007 TV circuit board.

UTV 6007 is built around the CD5151CP integrated circuit. It's very similar to the camping set TV described in this post about adding a composite video input to it. The post on Bidouille.org also has links to a bunch of useful datasheets. UTV 6007 already has a composite video and an audio line input out of the box, which was one of the reasons I originally bought it.

Part of the UTV 6007 circuit board marked "hbb".

I traced the audio path on the board to this curious circuit near the volume knob. I'm not sure what "hbb" stands for, but the circuit has a squelch function. It mutes the speaker when there's no picture displayed. This makes the TV silent when it's not tuned to a channel instead of playing the characteristic white noise. It actually takes a surprising amount of real estate on the small PCB.

Audio amplifier and squelch circuit in UTV 6007

This is the relevant part of the circuit traced out. The squelch takes input from the sync. sep. output on the CD5151CP. This is probably a signal that contains only synchronization impulses separated out from the video. R1, C1, R2 and C2 form an impulse filter. Positive impulses between 150 μs and 5 ms will open Q1. This discharges C3. If no impulses are present, R3 will in about 14 ms charge C3 to the point that Q2 opens. Q2 shorts the audio amplifier input to ground, making the output silent.

Q2 seems somewhat odd, since its collector doesn't have any bias current. So at first glance it appears that it would not be able to ground negative half waves of the audio signal. However, D386 amplifier has a bipolar differential input stage that sources base current. Apparently that provides sufficient collector current for Q2. In fact, the audio circuit (without the squelch) is identical to one of the D386 reference designs.

These timings suggest that the circuit detects vertical video synchronization. Unfortunately, the compact design of the TV makes it non-trivial to power it up while the circuit board is accessible. I didn't want to bother with any special setup, so I don't have any actual measurements. Sound distortion suggested that Galaksija's video signal was making this circuit erroneously trigger for a short time once every frame, which made for a choppy sound. Galaksija's video is in fact somewhat out-of-spec (for instance, it's progressive scan instead of interlaced).

Since I was not sure which timing exactly was the culprit, I opted to simply disable the circuit. I guess in the age of digital TV some untuned television noise just adds to the retro style of the whole setup. To disable the squelch I removed the R3 resistor. Without it, Q2 can't get any base current and hence always remains closed. A quick test confirmed that with that modification in place Galaksija sounds as it should on the TV speakers.

Posted by Tomaž | Categories: Analog

Comments

Maker Faire was great, better than Brighton's which is the only other one I have ever visited, but I did miss Galaksija as it was my principal reason for attending. Oh well, there's always next year.

Posted by Marko

Add a new comment


(No HTML tags allowed. Separate paragraphs with a blank line.)